design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors (smd type) a0.2 w ( ) reference size l 0 d0.5 h b0.2 (i) k (p) (i) + ? 0.3 max. pressure relief ( 0 10 and larger) 220 tk a capacitance (f) rated voltage code series identi?cation lot number negative polaritymarking (?) mark for lead-free products (black dot) endurance : 125 c 3000 h low esr at ?40 c (50 % lower than tg series) added esr speci? cation after the endurance test vibration-proof product is available upon request. rohs compliant features speci cations surface mount type series : tk type : v frequency correction factor for ripple current category temperature range ?40 c to +125 c rated voltage range 10 v.dc to 35 v.dc capacitance range 47 f to 470 f capacitance tolerance 20 % (120 hz/+20 c) leakage cur rent i < 0.01 cv after 2 minutes dissipation factor (tan ) please see the attached characteristics list characteristics at low temperature v.dc 10 16 25 35 (impedance ratio at 120 hz) z(?25 c)/z(+20 c) 3222 z(?40 c)/z(+20 c) 4333 endurance after the life test with dc rated woking voltage at +125 c 2 c for 3000 hours, the capacitors shall meet the limits speci? ed below. capacitance change within 30 % of the initial value (code u : 35 %) tan < 300 % of the initial limit (code u : 350 %) dc leakage current within the initial limit shelf life after storage for 1000 hours at +125 c2 c with no voltage applied and then being stabilized at +20 c, capacitors shall meet the limits speci? ed in endurance. (with voltage treatment) esr after the life test after the life test with dc rated working voltage at +125 c2 c for 3000 hours, esr value shall meet the speci? ed below. after 1000 hours 20 c < 150 % of the initial limit ?40 c < 200 % of the initial limit after 2000 hours 20 c < 300 % of the initial limit ?40 c < 400 % of the initial limit after 3000 hours 20 c < 1000 % of the initial limit ?40 c < 1500 % of the initial limit aec-q200 aec-q200 compliant example : 10 v.dc 220 f marking color : black size code 0 d l a, b h i w p k f 8.0 10.20.3 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.2 g 10.0 10.20.3 10.3 12.0 max. 3.5 0.900.2 4.6 0.700.2 dimensions marking (unit : mm) r. voltage (v.dc) 10 16 25 35 code acev frequency (hz) 120 1 k 10 k 100 k to correction factor 0.65 0.85 0.95 1.00 mar. 2016 04 downloaded from: http:///
$ o x p l q x p ( o h f w u r o \ w l f & |